ads1243 DRDY low active, but Sometimes the level is always high, What causes it , Most of the time it's good.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
ads1243 DRDY low active, but Sometimes the level is always high, What causes it , Most of the time it's good.
Hi User5214405,
It is possible that the PDWN pin does not have a good connection. This pin must be pulled logic high for the device to convert. Also, you must have a good clock source either from the crystal or externally derived clocking source. If this clock source is intermittent or stops, conversion will also stop.
Best regards,
Bob B