ADS1263EVM-PDK: how to get ADCPro? or connect my EVM to labview

Omar Ali

Part Number: ADS1263EVM-PDK
Other Parts Discussed in Thread: ADCPRO

Hi,

I bought the ADS1263EVM-PDK recently.. I don't know how to get the ADCpro to start working on it (There were a booklet in the package that I lost, I'm not sure if the instruction were there)...

I'm gonna need to be able to use it on labview next so I'm asking if there is any clear instruction of how to do that. I never used a non-NI dac on labview before :) ... I'm gonna need it read a voltage on 1 ch with 100Hz sampling rate ...

over 4 years ago

0 Christopher Hall over 4 years ago

TI__Mastermind 44550 points

Hi Omar,

Welcome to the TI E2E Forums!

You can download and refer to the ADS126xEVM User's Guide for instructions.

The most important steps are first installing ADCPro, and then installing the EVM Plugin for ADCPro (ADS126XEVM-PDK-SW).

I'm not aware of any LabVIEW specific instructions, but you can refer to ADCPro(TM) Analog-to-Digital Converter Evaluation Software User's Guide (Rev. C) for more instructions on how to use ADCPro.

0 Omar Ali over 4 years ago in reply to Christopher Hall

Prodigy 20 points

I tried to install the ADCPro but my request keep getting denied and the email it refers me to isn't working ...

0 Christopher Hall over 4 years ago in reply to Omar Ali

TI__Mastermind 44550 points

Hi Omar,

I'm afraid that we are unable to provide much assistance with this issue on E2E, we provide mainly applications support on this forum. However, I do know that to download ADCPro you have to fill out a form providing some information about your intended use of the software. I would recommend that you take a closer look at the form to ensure that you provided complete information. If you completed the form and still have issues then, you'll need to create a support ticket at http://www.ti.com/support for additional help.

Data converters

Data converters forum

ADS1263EVM-PDK: how to get ADCPro? or connect my EVM to labview