ADS1298: MSP430 HD device based drivers for Windows 10

Hi Vincenzo,

I'm not sure what this has to do with the ADS1298, I'll move this to the MSP430 forum for now. 

Hi 

What's the hard ware do you use? The launchpad?

You can try this one

http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSP430_FET_Drivers/latest/index_FDS.html

hi Alex, Gary,

the hardware is the ADS1298 EVM, on which there is an MSP430 to handle the interface with PC (so an MSP430 windows driver is required).

we tested the driver you sent, unfortunately without success.

thanks a lot in advance

KR

Vincenzo

Hi Vincenzo,

There is no MSP430 on the ADS1298ECGFE-PDK daughter-card nor the MMB0 motherboard.

Schematics for both can be seen here:

http://www.ti.com/lit/ug/sbau171d/sbau171d.pdf

https://e2e.ti.com/support/data-converters/f/73/p/775258/2868385#2868385

Is this something the systems team put together? 

oh, my bad, it is the ADS1293 demo (sorry for the typo)...

Hi Vincenzo,

Since we cannot provide the customer with signed drivers at this time, my next suggestion will be to temporarily disable Driver Signature Enforcement on the Windows 10 PC. Then, install the drivers and reboot the PC. Instructions can be found below. Note that the customer will need to have Administrator privileges on their PC.

We understand that this is a bit inconvenient, but we have had frequent success with getting customers up and running quickly with this method.

https://www.drivethelife.com/windows-drivers/how-to-disable-driver-signature-enforcement-on-windows-10-8-7-xp-vista.html

Best regards,