• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 47 subscribers
  • Views 520 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TSW14J56EVM: Data converters forum

Francesco Raffaelli
Intellectual 320 points
Part Number: TSW14J56EVM
Other Parts Discussed in Thread: ADC12J1600, ADC12J4000

Hello,

I am using a TSW14J56EVM together with a ADC12J1600. Everything seems to work fine when I select the sampling frequency of 1.6G. This seems to be the standard selection in the ADC GUI and it simply works by selecting 1.6G as sampling rate in the HSDC GUI.

However when I try to select 1.0G in both GUIs, which seems to be an available option. I get the picture attached. 

I assume this might be due to some parameters that should be changed but that I did not change or to some error in the order I change/update this parameters?

Has anyone encountered this sort of issue? What should be changed to sort this?

Thanks in advance,

Francesco

  • 0
    TI__Genius 12780 points

    Hi Francesco,

    One of our device experts is looking into your question, and will be back with you soon.

    Best Regards,

    Dan

  • 0
    TI__Guru* 91947 points

    Francesco,

    Please place the attached file into the following directory on your computer:

    C:\Program Files(86)\Texas Instruments\High Speed Data Converter Pro\14J56revD Details\ADC files

    After doing this, reload HSDC Pro and use the ADC ini file called "ADC12J4000_BYPASS_new.

    Regards,

    Jim

    https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/73/ADC12J4000_5F00_BYPASS_5F00_new.ini