ADC12D1800RF: HDL Model

Renan Santos Adriano

Mastermind 19770 points

Part Number: ADC12D1800RF

Hi Team,

My Customer is designing with existing FPGA source to communicate to our ADC12D1800RF, but he'd like to have a simulation environment with a TI supplied HDL model that he can simulate against. Does something like this exist?

Regards,

-Renan

over 5 years ago

0 dBrock over 5 years ago

TI__Genius 12780 points

Hi Renan,

We are taking a look into your question, and will be back with you soon.

Best Regards,

Dan

0 Neeraj Gill over 5 years ago in reply to dBrock

TI__Mastermind 20541 points

Hi Renan,

The closest thing we have is an IBIS model.

Here is the link.

Regards,

Neeraj

0 Renan Santos Adriano over 5 years ago in reply to Neeraj Gill

TI__Mastermind 19770 points

Hi Neeraj,

Thank you for the reply.

I already provided our IBIS model to my customer but he stated that he is looking for a VHDL/Verilog/System Verilog type model that can be used to test their FPGA Source code. Unfortunately, the IBIS model is not that. In the SNAA206.pdf, a reference to "FPGA source code" is made in section 6, on page 8 a source code was stated, unfortunately me and my customer was unable to find that source code.

Regards,

-Renan

0 Rob Reeder over 5 years ago in reply to Renan Santos Adriano

TI__Mastermind 27860 points

Hi Renan,

Under the TSW14J56EVM product folder on the TI website, the firmware source code (FPGA Firmware) can be downloaded by customers. See below.

Regards,

Rob

Data converters

Data converters forum

ADC12D1800RF: HDL Model