Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC08DJ3200EVM: How to use FPGA capture the data from ADC08DJ3200EVM ?

Part Number: ADC08DJ3200EVM

Hi,

      I bought a ADC08DJ3200EVM , and I want to use the FPGA board designed by myself to capture the data from ADC08DJ3200EVM . The input data is sine wave with 300MHz 200mV. I select Fs =1000 MHz MSPS as the onboard Fs selection and JMODE4 for the decimation and serial data mode. But the data I captured from the ADC is wrong and it is shown as the picrure below. Could you help me find the problem ?