• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 47 subscribers
  • Views 412 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AFE4410EVM: How to config AFE4410EVM to get consistent the Rx_sup current with datasheet

Shubiao Wang
Intellectual 1490 points

Part Number: AFE4410EVM
Other Parts Discussed in Thread: AFE4410,

Hi,

1. I am working on Rx_sup current consumption measurement with AFE4410EVM and AFE4410 GUI. However, the Rx_sup current is about 120uA @16hz sampling rate. Would you kindly tell me how to config the EVM to get consistent test results with its datasheet?

2. I want to know how to set the registers of AFE4410 to get into deep sleep mode because my sampling rate ranges only from 16hz -100hz.

BTW, you can also reply to me via email or a call. Please find my contact information via the infolink.

Best regards,

Shubiao Wang