ADC12DJ2700: ADC12DJ2700EVM with Arria10 evaluation board

Takashi Onawa

Genius 13200 points

Part Number: ADC12DJ2700

Hi Team,

My customer has one quick question.

Is it possible to use two ADC12DJ2700EVM with Arria10 evaluation board?

https://www.intel.com/content/www/us/en/programmable/products/boards_and_kits/dev-kits/altera/kit-a10-gx-fpga.html

Regards,

Takashi Onawa

over 3 years ago

0 jim s over 3 years ago

TI__Guru* 91957 points

Takashi,

Due to the board outline of the ADC12DJ2700, a riser would be needed on one of the FMC connectors, otherwise the two ADC boards will hit each other. If you can find a FMC-FMC riser, you then would need to verify if all of the required signals on both Arria 10 FMC connectors are present. We have not attempted this.

Regards,

Jim

0 Takashi Onawa over 3 years ago in reply to jim s

TI__Genius 13200 points

Hi Jim-san,

Thanks, it was very useful information!

Regards,

Takashi Onawa

Data converters

Data converters forum

ADC12DJ2700: ADC12DJ2700EVM with Arria10 evaluation board