Other Parts Discussed in Thread: DAC38J84
I am experiencing the same problems described in this forum http://e2e.ti.com/support/data-converters/f/73/t/815771?DAC37J84EVM-DAC3XJ8X-GUI-v-1-2-Link-Configuration-Issue.
When I push the button "Program LMK and DAC" everything seems to go well but after that if I try to change for example parameter M, no matter the value I introduce, the GUI always shows 1. Beside when I read a register from LMK the value becomes 0xFF and when I read a register from the DAC, the value becomes 0x0000... If I try "read all registers", all the values change to 0xFF in the LMK and to 0x0000 in the DAC....
Any suggestion to overcome this problem?