This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC32RF45EVM: Register settings for bypass mode and DDC usage

Part Number: ADC32RF45EVM


I am trying to setup ADCRF45 device in bypass mode. I am going through the instructions in user manual. In figure 4 of section 3.2, you show the DDC configurations. Why do we need to setup DDC. I thought DDC is bypassed in this case.

Can you please clarify?

If it is required, what those numbers really mean? 

Thank you.