• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 45 subscribers
  • Views 182 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

ADS1232: Source code for ADS1232

ADS1232REF: Scale mode shows "LG"

Todd Conard
Prodigy 30 points
Part Number: ADS1232REF

ADS1232REF board displays "LG" in scale mode.  I did not find LG in the user guide and did not find the firmware to examine.  Does anyone know what the "LG" means?

  • 0
    TI__Guru** 112765 points

    Hi Todd,

    Welcome to the E2E forum!  Did you attempt to calibrate once you entered scale mode?  The default settings are set to KG for the weight to be measured.  Can you give me a little bit more information as to how you got to this point, and if you press the RESET button, does the same LG display?  It might also be helpful for me to see a camera phone shot of the ADS1232REF showing the display and the board switch settings.

    Best regards,

    Bob B

  • 0 in reply to Bob Benjamin
    TI__Guru** 112765 points

    Hi Todd,

    Were you able to figure this out?  I am going to close this post for now and you can update as necessary or start a new post.

    Best regards,

    Bob B