This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AFE4403EVM: Can't Build Waveform in AFE4403EVM GUI Software

Part Number: AFE4403EVM

Hello,

I'm Working on the AFE4403EVM Rev.B board. in that so I am unable to get the PPG wave. So that I started to research about the mistake in that I got some idea about it. 

1. I update Firmware even thought PPG wave is not generated but in the low-level config, I can read and write the register setting using the AFE4403EVM GUI 

2. In the AFE4403EVM Rev.B board Green LED is not blinking but Blue led is working fine.

Can anyone suggest me about this issue?

Below I have attached the image for your reference.