• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 424 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC08D1520QML-SP: footprint difference with ADC08D1520

Tim Leung27
Prodigy 40 points

Part Number: ADC08D1520QML-SP
Other Parts Discussed in Thread: ADC08D1520

Please confirm that the footprint for ADC08D1520QML-SP does not match ADC08d1520.

The expectation was that the two parts can for used for development and flight with the same PWB layout.

Thank you

Tim

  • 0
    TI__Mastermind 44420 points

    Hi Tim,

    The footprints are close, not one for one, assuming commercial part is used for the initial layout, the space part looks like it could work.

    There may need some initial adjustments to the footprint to accommodate both.

    The best way to do this, would be to build both patterns in the CAD program and overlay them.

    Regards,

    Rob