This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS6445-EP: PCP impedance

Part Number: ADS6445-EP

Hi E2E,

I'm using driving circuit in datasheet page 38 for the frequency range under 100 MHz. When placing the product on PCB, I draw the path before the transformer (source side) with 50-ohm single mode. After the transformer (ADC side), patch has 50-ohm differential mode impedance. Are these impedance values of the paths with their mode (single or differential) correct?

Thank you for your time you spent and cooperation.

Kind regards,