Hi sir,
Could you help me on this inquiry?
Some pins like AIN and VMON how to terminate if we are not going to use them ?
floating or connect to GND?
Thank u.
Regards,
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Mark,
Since VMON is 3 state output, you can leave it open or connect to ground using 100K resistor. For AIN pin, I suggest connect it to known voltage (preferably reference), or leave it open.
Regards,
AK