Hi!
I will use DAC60508.
I plan to connect a 1m lead from DAC60508 on the circuit board to the data logger.
The document of DAC60508 says 2kΩ and 10nF load to GND is possible,
so is this case OK?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi!
I will use DAC60508.
I plan to connect a 1m lead from DAC60508 on the circuit board to the data logger.
The document of DAC60508 says 2kΩ and 10nF load to GND is possible,
so is this case OK?
Hi,
I cannot comment on this unless I know the cable capacitance and resistance. our device supports 2K with 10nF to Gnd.
Regards,
AK
Hi,
Any update on this thread regarding this question?
I assume you have got your answer, and closing this thread for now. Feel free to open this thread anytime, if you need more assistance.
Regards,
AK