Hi,
DAC8734 output is controlled by 1sec under stand-alone and LDAC actvie high.
After about 10min, setting fail or 0V output is occured.
Is there any advise for this issue?
I'm checking SPI timing.
Thanks.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
DAC8734 output is controlled by 1sec under stand-alone and LDAC actvie high.
After about 10min, setting fail or 0V output is occured.
Is there any advise for this issue?
I'm checking SPI timing.
Thanks.
Hi,
I didn't get your question fully. Can you please elaborate on the same?
Regards,
AK