LM98640QML-SP: LM98640QML-SP

Hello Maneesh,

We do not have a Verilog code or an interface through WaveVision software.

The LM98640-CVAL can be connected to a WV5 board but the software to drive it is not WaveVision.

The software we have to drive the LM98640 is LM98640CVALGUI, also known as AFEval.   It can be used with or without the WV5 interface board, but you will need a some other PC interface to drive it, such as an Aadvark that comes with the LM98640-CVAL board.  

The software only works with Windows XP or older systems.  It will not work with Windows 7 or newer systems.

It can be found here:

www.ti.com/.../LM98640CVAL

Dear Kirby

My the issue i raised have been answered through the link:

https://txn.box.com/s/zlxixt7l8poa17qsd9727i667klh9y5a

the problem is that the link dosnt work any more. You kindly check the old thread and ask the last solution provider for the VHDL/verilog code.

It has been provided inj past and i think it should not be any problem to provide once again.

regards