Other Parts Discussed in Thread: ADS124S08, ADS114S08EVM
Customer and I are both having problems getting https://www.ti.com/tool/DELTASIGMAEVAL-GUI software running on Win10 PC. I'm assuming it's a problem with the device drivers, but we can't figure out how to fix it. We think the drivers were updated using the process described in this post:
If we plug in the EVM and start the ADC software, the status bar says "Unable to identify device = ADS124S08", then "Hardware Connected, Ready...").
But the registers are not visible:
Device Manager shows:
Please advise on what else we can try.