WAVEVISION5: Wavevision5

Rajan Bedi

Part Number: WAVEVISION5

hello,

Will Wavevision5 allow the time-domain digital input samples (output samples from ADC) and/or the FFT spectra dats to be exported to a txt/csv file etc ...

Kind Regards,

Rajan

over 3 years ago

0 David Chaparro over 3 years ago

TI__Genius 11930 points

Hi Rajan,

Wavevision5 does not allow you to directly save the plot as a txt/csv file. However, there may be a way to save the channel data. What you can try is import a csv file that contains data and then you can acquire your data on that same channel, overwriting what you imported. Then when you save your channel data to a file it should save as a csv file.

Regards,

David Chaparro

0 Rajan Bedi over 3 years ago in reply to David Chaparro

Expert 1455 points

David,

thank you for your reply.

what not just save the channel data? how is this done?

thank you

rajan

0 David Chaparro over 3 years ago in reply to Rajan Bedi

TI__Genius 11930 points

Rajan,

To save the channel data to a txt/csv file what you have to do is go to the Channels Tab on the left side of the Wavevision5 application. You can click the save channel data to file. Then in the Channel Data file Name box you can change the file extension to txt or csv. This will save the application to that type, there is no need to import a different csv file as I had mentioned before.

Regards,

David Chaparro

0 Rajan Bedi over 3 years ago in reply to David Chaparro

Expert 1455 points

I don't see the following:

click the save channel data to file

will this operation save the input time domain data or the output frequency spectrum

thank you

0 David Chaparro over 3 years ago in reply to Rajan Bedi

TI__Genius 11930 points

Rajan,

It is one of the buttons under the Channel name (Third from the left), in the picture below I put a red box around it. This will save the time domain data.

Regards,

David Chaparro

Data converters

Data converters forum

WAVEVISION5: Wavevision5