This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC12D1600: Unprompted shutdown after 1-5s

Part Number: ADC12D1600

Hi -

After powering on my ADC12D1600 I get valid data and clock signals for an interval varying 1-5s, before it stops completely.

Any ideas why?

Thanks,

David J

  • Hi Dave,

    Can you explain what you mean by "stops completely"?

    The part shuts down? The part stops delivering data?

    Is this our evaluation platform or a board that you have designed?

    Off the top, I would check all the power supplies at the ADC and make sure they are within compliance for voltage and current.

    Regards,

    Rob