ADS1194: Floating signal

Luc Vanhove

Part Number: ADS1194

Hi,

When readout the 4 serial channels on ADS1194 and send it to a monitor, the signals are floating up or down if some movements happen. Is it possible to stabilize the readout more from the serial channels without losing signal quality?

Thanks Luc

over 4 years ago

0 Praveen Aroul over 4 years ago

TI__Mastermind 49786 points

Hi Luc,

This has to do with the motion artifact due to the movement causing the impedance to drift.

This is typically handled by post-processing algorithms and all our customers handle it differently in order to differentiate their product.

Data converters

Data converters forum

ADS1194: Floating signal