• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 394 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

ADC121S101: ADC121S101 digital output is double of input voltage

ADC121S101: SPI Interface

Shunsuke Nagata
Genius 12730 points
Part Number: ADC121S101
Other Parts Discussed in Thread: ADS7041

Hi,

My customer have used ADC121S101. And he would like to change 10-bit resolution and smaller package than ADC121S101. Then he is interesting in ADS7041. 

The question is 
- Does ADS7041 have compatible with ADC121S101? (Because he doesn't want to change interface design to ADC.)

I understand ADC121S101 has 3 leading zero bits in front of data but it may be cover by software in host MCU and timing chart may be same between ADC121S101 and ADS7041. I believe SPI interface may have compatible. Is it correct?

Regards,
Nagata.

  • 0
    TI__Mastermind 24970 points

    Hello,

    There are a couple changes that need to be done, but in the most they can be changed over easily.

    The ADC121 requires 16 SCLKs and has 3 leading zeros

    The ADS7041 requires 12 SCLKs and has two leading zeros. 

    If the customer can account for these differences, then it should be fine

    Regards

    Cynthia