This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC32RF45EVM: Sync is not getting

Part Number: ADC32RF45EVM
Other Parts Discussed in Thread: ADC32RF45, LMX2582, LMK04828,

Hello sir

We are using ADC32RF45 GUI to polarfire


We have given the following parameters

Nyquist Zone   : 1st Nyquist Zone

Internal clk frequency  : LMX2582 to ADC i.e. 1536MSPS

We are using Bypass mode of resolution 14 bit 

it means LMFS is 8224

In LMK04828 section clk0&clk1 zone divider value i am giving 16, it means refernce clk to FPGA is 192MHZ with data rate 7.68Gbps.

we are giving input to ADC is 150MHZ

In JESD204b section of GUI

chA link layer test mode is k28.5 mixed frequency

we are using jesd204b rx IP in polarfire of subclass1

please  suggest me to get the data properly with proper sync and sysref.


Roja Veereddy