Other Parts Discussed in Thread: ADS8167, ADS8168
Hi Team,
I'm looking for an EVM for ADS8167.
Is it possible to replace the IC (ADS8167) with the ADS8168EVM?
Best Regards,
Kenji
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
I'm looking for an EVM for ADS8167.
Is it possible to replace the IC (ADS8167) with the ADS8168EVM?
Best Regards,
Kenji
Hello Kenji,
Yes, the ADS8168 and ADS8167 are pin-2-pin compatible. If you use the software GUI, you will want to set the Sampling rate to 500ksps or less.
Regards,
Keith Nicholas
Precision ADC Applications
Hi Keith,
Thank you for your answer.
If ADS8168EVM is set to SPS=500kHz with GUI, will it be the same operation verification as ADS8167?
Best Regards,
Kenji
Hello Kenji,
Yes, if the ADS8168 is operated at 500ksps on the EVM, then you will get equivalent performance to the ADS8167 operating at 500ksps.
Regards,
Keith