Due to the U.S. Thanksgiving holiday, please expect delayed responses during the week of 11/22.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DAC39J82: Jesd lane connection?

Part Number: DAC39J82

hello

we have two of dac39j82, both using LMF 421, 4 lanes mode.

Due to pcb layout reason, for the first dac, we want to use pin Rx0, Rx1, Rx2, Rx3 for the 4 jesd lanes. for the second dac,
we want to use pin Rx4, rx5, rx6, rx7 for the 4 jesd lanes.

Can we configure the described connection above by using the config95 register as shown in the attached pix?  Is there anything wrong in doing so?

Please assist. Thanks