Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State
  • Locked Locked
  • Replies 3 replies
  • Subscribers 46 subscribers
  • Views 182 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AFE4404EVM: dealing with very low signal values

Alexander Prebeck
Prodigy 20 points
Part Number: AFE4404EVM
Other Parts Discussed in Thread: AFE4404

Hello,

I am currently working with a AFE4404 EVM - Kit. In my Application (both emitter and detector are butt-coupled to a fiber each and then imaged to a sample) i have to deal with very low signal values. I already use the highest Emitter current values and the highest possible Gain. In this Setup i am only able to achive 4% of FS at best.

Is there a way to integrate the LED signal over a longer period of time to get a higher ADC reading? Or is there another option (except changing the optics/fibers/emitter/detector-parts) to get a higher reading.

Regards

Alex