ADS54J40: General Registers address 0 read data

user5983069

Intellectual 320 points

Part Number: ADS54J40

Hello,

We wrote data 0x81 at general registers address 0x0 and after that,

read general registers data was 0x3c .

but In datasheet,I can see bit [6:1] is all "0".

so I am littlebit confused. Is this right action？

over 4 years ago

0 jim s over 4 years ago

TI__Guru* 91947 points

User,

Bits 6:1 are not readable and default to a "011110" if you read these back. Bits 7 and 0 are self clearing and will always readback as "0". What you are reading is correct.

Regards,

Jim

0 user5983069 over 4 years ago in reply to jim s

Intellectual 320 points

Thanks JIM

I understood.

Tak

Data converters

Data converters forum

ADS54J40: General Registers address 0 read data