This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS1298ECGFE-PDK: an error when running the measurement program use ADS1298ECGFE-PDK

Part Number: ADS1298ECGFE-PDK

Hi team,

The customer meet an error when running the measurement program use ADS1298ECGFE-PDK, as below picture showed.

Thanks & B.R


  • Hi William,

    What Windows Operating System is the software installed on? Are they able to follow the installation process in the user guide without any errors?



  • Hi TCT,

    Now the data can be collected normally, but I send 2mv10hz normal dark wave through the signal generator, and the software shows that there is no signal. How to set it to collect data correctly.


  • Hi,

    Glad to hear you can run the EVM GUI without any error. 

    Please make sure the EVM is set up correctly by going through the user manual as a starting point. Section 4 in the user guide shows some tests (input short, internal test signals) that you can run for verification. 

    If possible, please show how your EVM and device are set up for your testing and how you apply the signal to the EVM.