• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 413 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

ADC3444EVM: Will this work with Xilinx spartian-7 FPGA

FMC-ADC-ADAPTER: Connect Multi-AFE5818EVM/AFE5807EVM through FMC-ADC-Adaptor

Xiangang Wang
Prodigy 40 points
Part Number: FMC-ADC-ADAPTER
Other Parts Discussed in Thread: AFE5818

I was trying to Connect TSW14J56EVM(FMC) with Multi-AFE5818EVM(lvds) and/or AFE5807EVM(lvds) through FMC-ADC-Adaptor. 

Can I connect FMC to lvds ADC card with FMC-ADC-Adaptor?  Or,Must I connect them with TSW1400EVM(lvds) with Multi-AFE58XXEVM(lvds) through lvds ?

I hope the software high speed data converter pro,HMC-DAQ for AFE5818EVM and software for TX7332EVM both work.

  • 0
    TI__Expert 6040 points

    Xiangang, 

    i remember i replied a different post recently. We can't support the mulitple EVMs through FMC on LVDS.  the current FMC is only for JESD mode. you might get JESD work through mulitple EVMs. while this is not verified by TI. 

    AFE5818 is well proven device in 32CH to 256ch ultrasound systems. so it shouldn't be a problem from AFE side. you can go ahead to build a multi-AFEs board. 

    Thanks!