Due to the U.S. Thanksgiving holiday, please expect delayed responses during the week of 11/22.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DAC43608: Address Byte Error & I2C Bus Protocol

Part Number: DAC43608

Hi there,

My customer is evaluating DAC43608. He has a question about the address byte.

The address byte should be 8-bit. But Table 1 shows that Address byte is DB [32:24], which is 9-bit, is this a typo?

And could you provide example codes to explain how to arrange the I2C bus protocol like Fig.59?