ADS9110: Max current into analog inputs

Mitchell

Part Number: ADS9110

Hi Team,

What's the absolute maximum +/-Current into the analog inputs for the ADS9110? My customer needs to make sure they adequately protect the inputs from a fault event.

Thanks,
Mitchell

over 4 years ago

0 Ryan Andrews over 4 years ago

TI__Guru 64986 points

Hi Mitchell,

Thanks for your post. I'm looking into this to see if we can provide more information. Please allow me a day or two to find out.

Regards,

0 Mitchell over 4 years ago in reply to Ryan Andrews

TI__Expert 4915 points

Thanks Ryan. Do you have any update here?

0 Ryan Andrews over 4 years ago in reply to Mitchell

TI__Guru 64986 points

Hi Mitchell,

Yes, thanks for your patience. I could not find a reason why this spec was excluded from the data sheet. Please ask the customer to assume +/- 10 mA, which is our default for non-supply pins.

Regards,

Data converters

Data converters forum

ADS9110: Max current into analog inputs