DAC71416: Flexible output configuration with respect to reference voltage

sasi kumar1

Part Number: DAC71416

HI,

we are trying to design this DAC for Output Range: ±2.5 V, based on the Pin functions [ VCC -> Output positive analog power supply (9 V to 41.5 V). ] do we have to provide 9V in VDD for Output Range: ±2.5 V

over 3 years ago

0 Paul_Frost over 3 years ago

TI__Guru 53503 points

Hi Sasi,

To clarify, VDD must be equal to VAA and is nominally 5V. I think you meant to refer to the VCC supply. The VCC must be at least 9V even when you are using the ±2.5V range.

Thanks,

Paul

Data converters

Data converters forum

DAC71416: Flexible output configuration with respect to reference voltage