This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS1298ECGFE-PDK: measured signals are not similar to ECG signals

Part Number: ADS1298ECGFE-PDK


We have been using TI kit ADS1298RECG-FE for measuring ECG signals with the help of 10-lead cable attached to patient. So far we are not able to capture proper ECG signals. We have tried following different method/configuration.

1) all 10-lead attached to patient

2) only RA LA RL LL lead attached to patient

3) Different gain settings

4) Different configuration in registers.

5) Different post-processing filters.

I have also attached 4 images with and without filters for your reference. Kindly provide configuration settings or any other recommended test parameters to find out issue in current setup.