Other Parts Discussed in Thread: TIDA-01028,
I am using two ADC12DJ5200RF in dual channel mode. (Schematic reference: TIDA-01028). LMK, LMXs and ADCs(JMODE3) are configured through SPI via FMC+.
This ADC board is connected to Stratix 10 evaluation kit. The JESD data received is not stable. SYNC is often lost.
I need to be sure that my ADCs are working fine and my board design is okay. For that is there any firmware support for Stratix 10(TX) to test the ADC? (Just like the way there is support for Arria 10 FPGA)