• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 235 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

AFE4490SPO2EVM: AFE44x0SPO2EVM GUI on Windows 10?

AFE4490SPO2EVM: AFE4400

Yanni Li
Intellectual 1960 points
Part Number: AFE4490SPO2EVM

Hi team,

My customer would like to know if it is possible to get the data from AFE4490SPO2EVM without using GUI. For example, is it possible to connect the EVM to a arduino board and get the data through the arduino interface?

Because in his project he needs to get a lot of different signals( emg or ecg signals etc.), and to synchronize these signals, So he wants to connect 

various modules including AFE4490SPO2EVM to an arduino board.
Regards，
Jenny
  • 0
    TI__Mastermind 49686 points

    Hi Jenny,

    Yes it is possible to interface the AFE in AFE4490EVM to the Arduino board.

    But this will require hardware modifications. Please refer to the EVM user guide (Table 4) for the digital signals that need to be interfaced to the Arduino board.

    The resistors mentioned in the table must be de-soldered and the signals closer to the AFE end must be jump wired to the Arduino board assuming they are also of same voltage level of 3.3V. If they are not then you will need a voltage translator.