• State Resolved
  • Locked Locked
  • Replies 4 replies
  • Subscribers 46 subscribers
  • Views 210 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

ADS7253: Can I set CS as low for constant to do sample as well?

ADS7253: >1MSPS, 4ch/8ch simultaneous-sampling ADC

Hollis Liu
Intellectual 2535 points
Part Number: ADS7253
Other Parts Discussed in Thread: ADS9234R

HI Team, 

Do we have 4ch/8ch simultaneous sampling ADC(>1MSPS)? I see the ADS7253 only have dual simultaneous sampling. But we need more  simultaneous sampling channels. Thanks. 

  • 0
    TI__Guru 57336 points

    Hello Hollis,

    Thank you for your post.

    How many simultaneous sampling channels do you require and how many total do you need to measure?

    We won't be able to find a SAR ADC device with 4 or more simultaneous sampling channels. It is possible to synchronize multiple devices together, for example 2 or 4 ADS7253s. 

    If delta-sigma architecture is an option, we have many devices which support 4-8 simultaneous channels, but the 16-/24-bit resolution may be overkill.

    Regards,

  • 0 in reply to Ryan Andrews
    TI__Intellectual 2535 points

    Hi Ryan, 

    thanks for reply. 

    do we have >1MSPS sample rate and delta-sigma architecture devices which support 4-8 simultaneous channels? If yes, please help to recommend. Thanks. 

  • +1 in reply to Hollis Liu
    TI__Guru 57336 points

    Hi Hollis,

    These delta-sigma ADCs which support 4/8 simultaneous sampling channels cannot sample > 1 MSPS. Sorry for the confusion. 

    If the sampling rate is a fixed requirement, then the customer will need to synchronize multiple SAR ADCs by sharing a common /CS.

    To reduce the component count, they can consider a 2-channel simultaneous SAR ADC like the ADS9234R. This device samples up to 3 MSPS with 14-bit resolution. 2-4 devices could then be synchronized together with a common /CS. The data from each device can be read on a single SDO pin (SDOA) or on multiple SDO pins in parallel to reduce SCLK speed. SDO connections could be shared if each device uses it's own /CS.

    Regards,

    Ryan

  • 0 in reply to Ryan Andrews
    TI__Intellectual 2535 points

    Thanks Ryan. we are promoting the 8353-Q1 as customer wants Q1 grade.