• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 174 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC08D1020: setup and hold clarification

Michael T Schneider
Expert 3780 points
Part Number: ADC08D1020
Other Parts Discussed in Thread: ADC08D1000

One of our designs is migrating from the ADC08D1000 to the ADC08D1020.  The FPGA designers are asking about the setup and hold times on the data interfaces.  The ADC08D1000 datasheet has nS as the units and the ADC08D1020 datasheet has pS, see screenshot below.  Please confirm it the difference is real or a typo?

  • 0
    TI__Mastermind 24350 points

    Hi Michael,

    Those units should all be pSec. The bit times are only around 1 to 2 ns depending on output mode, so nSec is incorrect.

    Looks like a typo in the old original ADC08D1000 datasheet that was carried forward into the TI version during the migration in 2012.

    We will work to get this adjusted.

    Thx,

    Rob