• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 112 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SMARTRF06EBK: Working with Accelerometer

Furkan Fehmi Sefiloglu
Expert 3118 points
Part Number: SMARTRF06EBK
Other Parts Discussed in Thread: CC2650

Hi Team, 

Can you please check and advise with following request?

"

I have a SmartRF06EB and CC2650. I could not find how to read the acceleration values from the BMA250E accelerometer on the SmartRF06EB. My goal is to send the acceleration values to my phone via BLE. I am trying to change the "Project Zero" code, which is ready for BLE use, to take a value from the accelerometer, but I could not find a code to refer to. Do you have a reference code for the accelerometer?

"

Thanks in advance

Best Regards

Furkan Sefiloglu

  • 0
    TI__Guru 73461 points

    Hi Furkan,

    It sounds like you are starting development on a new project. Have you considered using the CC2640R2 device instead of the CC2650? It's the newest ROM spin of the same device, which will give you more flash space to use for your application.