ADS41B49 - Altera HSMC interface evaluation?

PaulSchoenke

Other Parts Discussed in Thread: ADS41B49, ADS4249EVM, ADS4249

Hello:

I'm interested in the TI ADS41B49 device and am wondering if it is set up to be able to evaluate this device with the EVM:

http://www.ti.com/tool/ads41b49evm

and the TI HSMC to Altera bridge board:

http://www.ti.com/tool/hsmc-adc-bridge

It looks to be the case, but I wanted to confirm before purchasing both items.

Any feedback or input is welcomed and appreciated!

Thanks again!

Paul

over 11 years ago

0 Matt Guibord over 11 years ago

TI__Genius 17290 points

Hi Paul,

We believe it should be fine. The pinout between the ADC EVM and this connector matches. The customer could also consider using our TSW1400EVM as the development platform, which has a Stratix IV FPGA on it.

There is an appnote and example code showing the ADS4249 interfacing with a Stratix IV FPGA using the ADS4249EVM and TSW1400. I have copied the link below. The interface for the ADS41B49 will be similiar to the ADS4249.

http://www.ti.com/general/docs/litabsmultiplefilelist.tsp?literatureNumber=slaa545

Regards,
Matt Guibord

Data converters

Data converters forum

ADS41B49 - Altera HSMC interface evaluation?