This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
In the description of the 32-clock frame the datasheet shows a 33rd clock pulse before beginning a new conversion. I would like to know if I could begin a conversion immediately after the 32nd clock. Will this work?
The minimum clocks required in 32 Clock mode is 30 Clks. But with 32 clk mode, time between two consecutive falling CS edges will be around 800ns and sampling speed of device will reduce to 1.25MSPS.
Please click "This resolved my issue" button if this post answers your question
11 Ways to Protect Your Power Path
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.