This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

DEV-ADC34J22

Prodigy 50 points

Replies: 2

Views: 377

I am working on Testing of DEV-ADC34J22 EVM. But, while trying to test on High Speed Data Converter GUI, it says, board not connected. Can you please guide me to solve this issue.

Thank you,
Vimal

  • Genius 12785 points

    Vimal,

    The DEV-ADC34J22 EVM module is a 3rd party EVM that is designed to plug into the Cyclone 5 SOCkit FPGA platform.  This EVM is not compatible with HSDC Pro software.

    This evaluation is supported by the Dallas Logic 3rd party and they should be contacted for software and firmware support between DEV-ADC34J22 and the SOCkit eval platform.

    http://dallaslogic.com/prod_dev-adc34j/

    If you wish to evaluate just the ADC34J22EVM this is compatible with HSDC Pro and the TSW14J56 eval platform.

    Ken

    HSDC

    High Speed Products

    HPA

     

  • In reply to Ken C:

    Hi Ken,

    Thanks a lot for your help.

    -Vimal

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.