• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 283 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

FDC1004QEVM: Using multiple EVM modules on one PC

Derek Ruddock
Prodigy 50 points
Part Number: FDC1004QEVM
Other Parts Discussed in Thread: FDC1004

I need to connect more than one FDC 1004QEVM module to a single PC.

Unlike many programs second instances of the Sensing Solutions EVM GUI will not start.

Is there a logical and practical work around to this than anybody can advise please?

  • 0
    TI__Genius 17440 points

    Hi Derek,

    Unfortunately, running simultaneous GUIs is not possible with the OneUI framework that the GUI is built on. You will not be able to use more than one EVM on a single PC. However, the FDC1004 has four channels, but only two channels have sensor plates. If you only need to monitor four channels you could break off the sensor portion of the board and connect your own sensors to all four channels. Otherwise, you would need to use multiple PCs or write your own GUI and firmware in order to use multiple EVMs simultaneously. 

    Regards,