FDC1004QEVM: GUI Samples per Second Issues

Susan Lane

Prodigy 220 points

Part Number: FDC1004QEVM

Yesterday using the data streaming from the GUI, for a single channel I had was taking measurements at 100 Hz.

I just plugged in the sensor again, and am only able to stream at 5 Hz.

What could cause this issue, and how can I resolve it?

over 5 years ago

0 Chris Oberhauser66 over 5 years ago

TI__Genius 14270 points

Hi Susan,

Were you using the same register settings in both conditions? The PC GUI does sometimes exhibit large amounts of latency, so it is possible you were seeing this issue with the GUI. I don't have any real good workaround to address this latency.

Regards,

ChrisO

0 Susan Lane over 5 years ago in reply to Chris Oberhauser66

Prodigy 220 points

Hi,

I was using the same register settings. The sensor seems to bounce between 4 Hz and 100 Hz.

Data converters

Data converters forum

FDC1004QEVM: GUI Samples per Second Issues