ADS8887: ADS 8887 in single ended mode

Doron Sattelman

Prodigy 10 points

Part Number: ADS8887

How can I use the ADS8887 for single ended measurements without loosing full scale range and precision?

over 5 years ago

0 Keith Nicholas over 5 years ago

TI__Mastermind 36150 points

Hello,

Welcome to the TI e2e community!

There are multiple ways to accomplish this. Take a look at the TI Precision Labs, which provides quite a bit of background on how to design different front-end signal chains. Specifically, section 2.5 shows how to take a 0-5V single ended unipolar signal and drive a fully differential ADC input.

https://training.ti.com/ti-precision-labs-adcs

https://training.ti.com/ti-precision-labs-adcs-driving-a-sar-adc-with-a-fully-differential-amplifier?cu=1128375

Also, the Analog Engineer's Circuit Cookbook shows some additional examples as well.

http://www.ti.com/lit/slyy138

Regards,

Keith N.

Precision ADC Applications

Data converters

Data converters forum

ADS8887: ADS 8887 in single ended mode