This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

ADS1263 labview

Prodigy 10 points

Replies: 1

Views: 203

Hello,

We have two ads126xEVM-PDK card and we want to take data at the same  and 20000 datas by LABVIEW . But we take 14000 or 5000 e.t.c. rondom number,what could be the reason for this?

and in addition to the image of this program. 

Thank you and have nice day.

1 Reply

  • Hi,

    Welcome to the TI E2E Forums!

    The ADS1263EVM-PDK firmware and software was designed in such a way that data is collected in chunks (called "blocks"). The software calculates an appropriate block size when collecting data to ensure that at least as many samples as requested are collected; however, it typically collects more than the number of requested samples.

    The block size calculation can be modified in LabVIEW; however, I don't know what effect this may how on the ADS1263EVM-PDK firmware.

    Best regards,
    Chris

    Best regards,
    Chris Hall
    Applications Engineer | Precision ADCs


    Check out these helpful resources...
    TI Precision Data Converters | TI Precision Labs - ADCs | Analog Engineer's Calculator | Data Converters Learning Center | Selection Guide

     

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.