DAC38RF89EVM： DAC38RF8X EVM GUI program

user5103379

Part Number: DAC38RF89EVM

How can I get the source code of the DAC38RF8X EVM GUI program? I have some doubts about the operation of the Configure DAC button in the GUI. I hope I can get the source code to solve the problem.

over 5 years ago

0 Ebenezer Dwobeng over 5 years ago

TI__Genius 9695 points

Hi,

You can use the 'Status Log' to clarify any doubts you have about the 'Configure DAC' button. The status log shows all the register read and write operations when you push the 'Configure DAC' button. Double Click inside the lower left corner of the GUI to bring up the 'status log'.

Thanks,

Eben.

0 user5103379 over 5 years ago in reply to Ebenezer Dwobeng

Prodigy 50 points

But configuring some of these registers requires the necessary delay information, which is not available in the log.

0 Ebenezer Dwobeng over 5 years ago in reply to user5103379

TI__Genius 9695 points

There is no delay needed to program the registers. The delay provided by the SPI interface is enough to successfully read and write to the device

Data converters

Data converters forum

DAC38RF89EVM： DAC38RF8X EVM GUI program