DAC904: power-up sequence

K.Yaita

Part Number: DAC904

Hi Team,

My customer considers to use DAC904 with VA=5V, VD=3.3V.
Is there recommended power-up sequence between supplying VA and VD?

Best Regards,
Yaita

over 5 years ago

0 Yusuf%20Agoro over 5 years ago

TI__Expert 4880 points

K. Yaita,

I forwarded your question to a device expert. They should be with you shortly.

Thanks

Yusuf

0 K.Yaita over 5 years ago in reply to Yusuf%20Agoro

Guru 29690 points

Hi Yusuf-san,

Thank you for your support.
I will wait for your team's reply.

Best Regards,
Yaita

0 K.Yaita over 5 years ago in reply to K.Yaita

Guru 29690 points

I aplogize to put a rush on you however my customer wants to know when to reply it.
Your support would be appreciated.

Best Regards,
Yaita

0 Jalen Tate89 over 5 years ago in reply to K.Yaita

TI__Genius 9675 points

Hi K. Yaita,

There is no recommended power up sequence between supplying the Analog Voltage (VA) and Digital Voltage (VD).

Jalen

Data converters

Data converters forum

DAC904: power-up sequence