• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 199 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC34J44: compatability with KU040

Vincenzo Pizzolante
Mastermind 22736 points
Other Parts Discussed in Thread: ADC34J44

hi

can the ADC34J44 EVM be connected to the KU040, i.e. use the KU040 as FPGA board (FMC connector, SW, etc.)?

thansk a lot in advance

KR

Vincenzo

  • 0
    TI__Guru* 91947 points

    Vincenzo,

    We have never used the KU040, but if it has the serdes lanes, SYSREF, clock, and SYNC signals all routed per the ANSI/VITA 57.1 FMC standard, I believe the ADC can be used with this platform.

    Regards,

    Jim