This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

WEBENCH® Tools/ADC12J1600EVM: ADC12J1600EVM

Prodigy 165 points

Replies: 6

Views: 180

Part Number: ADC12J1600EVM

Tool/software: WEBENCH® Design Tools

Hello,

I'm, working on some device in automotive and I would like to use your product "ADC12J1600EVM - ADC12J1600 12-Bit, 1.6-GSPS, RF Sampling Analog-to-Digital Converter Evaluation Module" into it. I'm preparing this device in 3D software, so I need the 3D data of your product to my work, but I can't find any 3D data on sides of your company. If you have any 3D data, can you send me it please? It would be great if the 3D data will be in STEP format.

Best regards,
Jakub Nigut

  • Hi Jakub,

    Please see attached zip files for component data.

    ADC12JXX00.zip

    Best Regards,

    Dan

  • In reply to dBrock:

    Hi Dan,

    Thank you for the STEP data of ADC12J1600EVM. In STEP file which you sent me is just empty PCB board without any diodes. If you have STEP file of ADC12J1600EVM  with all components, can you send me it please? In case if no, can you send mi just dimensions of ADC12J1600EVM with all components? 


    Best regards,
    Jakub

  • In reply to dBrock:

    Hi Dan,

    Thank you for the STEP data of ADC12J1600EVM. In STEP file which you sent me is just empty PCB board without any diodes. If you have STEP file of ADC12J1600EVM  with all components, can you send me it please? In case if no, can you send mi just dimensions of ADC12J1600EVM with all components? 


    Best regards,
    Jakub

  • In reply to Jakub Nigut:

    Hi Jakub,

    Please see attached for step file of entire EVM.

    ADC12JXXXXEVM_A1.zip

    Best Regards,

    Dan

  • In reply to dBrock:

    Hi Dan,

    thank you for the data. I have few more question on you about this product.
    Can you tell me from which part of PCB will be this PCB mounted? Does these 2 screws serve to purpose of mounting?

    On which position should be PCB mounted? Should be mounted on position A,B or C? Or each position is suitable for mounting?

    Best regards,

    Jakub

  • In reply to Jakub Nigut:

    Hi Jakub,

    These two screws are stands that help to physically stabilize the EVM when connected to the FPGA data capture card (TSW14J56EVM). They are not required for electrical purposes, but remove any stress due to imbalance that might damage different connectors over time.

    In regard to the mounting positions that you shared, what do you intend to mount to? If it is to the TSW14J56EVM, then I would typically see this a position B.

    Best Regards,

    Dan

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.